Everything Your Training Division Actually Needs
Every feature maps to a real training requirement. If it doesn't help your operators pass their pump test or make your instructors' jobs easier, it's not in the platform.
15 Built-in Scenarios — Ready to Assign Today
The same curriculum your operators would run at the National Fire Academy. 12 NFA evolutions + 3 NFPA 1002 JPR scenarios. Pre-built, auto-scored, no setup required.
Full evolution guide →Single-Line Supply
Basic pump operations with one discharge line. The foundation evolution for new pump operators. Covers intake setup, throttle control, and maintaining target discharge pressure.
Multi-Line Operations
Two and three-line setups with different nozzle pressures. Operators learn to balance discharge pressures across multiple lines simultaneously.
Relay & Drafting
Tandem pumping and draft operations from static water sources. Covers rural and mutual aid scenarios where hydrant supply is unavailable.
Foam, Master Stream & Standpipe
Foam eductor operations, large-flow appliances, and standpipe configurations for high-rise scenarios. NFPA 1002 JPR coverage.
Scenario Builder
Build evolutions that match your apparatus, hose loads, and response area. Every parameter is configurable — right down to the nozzle your engine carries and the flow rate of your district's weakest hydrant.
Builder walkthrough →Water Supply
Hydrant, tank, draft, or relay. Model your district's actual supply characteristics.
Discharge Lines
Configure up to 4 lines with independent hose size, nozzle, length, and elevation.
8 Grading Categories
Weight PDP accuracy, safety, flow balance, throttle control, and more per scenario.
Pass/Fail Tolerances
Configurable PSI window, max attempts, and instructor override for judgment calls.
24 Panel Layouts
Operators train on a panel that looks like the one they pump at 2 AM. Gauge positions, valve handles, and display layouts match real apparatus. Department License includes the custom panel editor.
View all panels →Pierce
Velocity, Enforcer, Arrow XT, Control Zone top-mount, and side-mount configurations.
Rosenbauer
Commander, Admiral, Warrior, and T-Rex configurations with digital flow displays.
E-ONE & More
E-ONE, Waterous/Hale, KME/Seagrave, Darley, Ferrara, Spartan ERV, Sutphen, Smeal.
Custom Editor
Build your exact panel from scratch. Drag gauges, set ranges, label everything. Department License.
15 eLearning Courses — Classroom Before the Panel
Pump theory, friction loss calculations, NFPA standards, and apparatus operations. Each course includes module content, quizzes, and completion tracking integrated with the training log.
Structured Curriculum
Courses organized into modules with progressive content. Trainees work through pump theory, friction loss, NFPA 1002 requirements, and apparatus operations at their own pace.
Built-in Quizzes
Each module includes knowledge checks. Quizzes are scored automatically and results feed into the trainee's progress record. Instructors see who passed and who needs review.
Training Hours Log
Every course completion and simulation attempt is logged with hours. The training log produces audit-ready documentation for state reporting, ISO audits, and compliance.
Assign & Track
Instructors assign courses alongside simulation evolutions. The trainee dashboard shows both in one queue. Completion status, quiz scores, and time spent are visible to all.
Real Hydraulics — Not Arcade Physics
PumpForge models real hydraulic behavior so operators build correct intuition. Same inputs always produce the same outputs. NFPA and NFA-aligned equations. Operators who pass here can pump on the fireground.
How the engine works →Reports & Certification — Audit-Ready from Day One
PumpForge documents every control input, gauge reading, and safety event automatically. Your training records survive any audit — no paperwork, no manual data entry.
Reporting deep dive →After Action Reports
Full timeline of every gauge reading, control change, and safety event at 20 Hz resolution. Instructors scrub through frame by frame, add annotations, and export to PDF.
Automatic Scoring
Scored against your configured tolerances the instant a session completes. Pass/fail with detailed category breakdowns across all 8 grading dimensions.
SHA-256 Verified Certifications
Issue pump operator certifications with documented evidence. Track expirations, automate renewal reminders, and manage recertification queues. Public verification portal.
Compliance-Ready Export
Records formatted for state fire commissions, ISO audits, and NFPA compliance reviews. Timestamped, digitally signed, traceable to the individual session.
Run Your Entire Program from One Dashboard
PumpForge handles scheduling, monitoring, records, and role management. Everything an instructor needs to run a compliant training program — no IT support required.
Platform management guide →Live Monitoring
Watch active trainee sessions in real time via WebSocket. See gauge states, control positions, and safety events. Monitor multiple sessions simultaneously.
5 Role-Based Access Levels
Dept Admin, Instructor, Trainee, Inspector, and Sales. Each person sees only what they need. Nothing leaks across role boundaries.
Multi-Station Support
Group personnel by station. Track training completion and certification status across your entire department. Assign by station, shift, or individual.
Zero Infrastructure
Cloud-hosted on hardened AWS infrastructure. Works in any modern browser on any device. No software to install, no servers to maintain.
Run an Evolution With Your Crew
PumpForge is in development. Registration and subscriptions will open soon.